Shop/Flashes/Camera Flashes
YN-467II i-TTL Flash Speedlite for Nikon
₱5,950.00
Product Highlights
Multi-Flash Lighting Application
Exposure Bracketing ( FEB)
Use Wide-angle Diffuser
Rear-curtain Sync
FE Lock ( This function can only be available when your camera supports it, for the setting of FE lick, refer to your camera manaul)
Application of AF LED
Exposure Compensation
Feflection Flash
Use Reflection Board to take photos
Detail Description
Specification:
Upgraded new Yongnuo flash unit YN-467 II, we improved on some functions.
1, Add a PC port, and then you can use it off camera via a PC Sync cable.
2, Change the batteries room from two ways into one way.
3, Change the controls on the rear panel.
Keep below functions as the first generation:
a), TTL mode, the metering system of this camera will detect flash illumination reflected back from the object so as to automatically control flash output in this mode. In this E-TTL mode, you can also make compensation of flash brightness with the ” Output contral knob” within the range of ±1.5ev, with the precision of 0.5ev. ( The compensation value can be added to the compensation value set on the camera.)
b), Auto Zoom, The flash speedlite will move forward and backward with the changes of lens focus to suit different illumintion zones when it is mounted on the camera which supports E-TTL Function, the zoom range is 24mm – 85mm.
c), M mode, you can set flash luminance as per your favorite, luminance level will be displayed by luminance indicator. When taking photos, you only require setting the flash luminance, adjust the camera and press the shutter, the flash light will flash under the camera synchronous signal.
d), S1 Mode, it will work with the first work of the master flash synchronously in this mode, with the result consistent with the use of radio slave. ( When you use this mode, your master flash should be set at manaul flash, the TTL flash system with pre-flash function and the red-reduction function with multiple flashes should not be used.)
e), S2 Mode, it is very similar to S1 mode, but it can support the master flash in TTL mode. In particular, if S1 mode can not have correct and synchronous flash with the inbuilt flash, you can try to use S2 mode.
Advanced Application:
a), Multi-Flash Lighting Application
b), Exposure Bracketing ( FEB)
c), Use Wide-angle Diffuser
d), Rear-curtain Sync
e), FV Lock ( This function can only be available when your camera supports it, for the setting of FE lick, refer to your camera manaul)
f), Application of AF LED
g), Exposure Compensation
h), Feflection Flash
i), Use Reflection Board to take photos
Parameters:
| Guide Number | 33 |
| Flash Mode | TTL / M / S1 / S2 |
| Circuit design | Insulated Gate Bipolar Transistor (IGBT) |
| Vertical rotation angle | -7~90 degree |
| Horizontal rotation angle | 0~270 degree |
| Power | 4 X AA size Batteries ( Alkaline or Ni-MH are usable) |
| Lighting times | 100 – 1500 times (with alkaline batteries) |
| Recycle Time | approx 5s ( AA alkaline cell used) |
| Color Temperature | 5600K |
| Flash Duration | 1/800S – 1/20000S |
| Flash Control | TTL auto flash or manual level 7 light quantity output contral |
| Dimensions | 72 x 135 x 85mm |
| Net Weight | 250g |
Suitable for:
Nikon D7000 D5100 D5000 D3100 D3000 D400 D300s D300 D200 D90 D80 D60 D40x D40
