Shop/Flashes/Camera Flashes
Phottix Mitros+ TTL Transceiver Flash for Nikon Cameras
₱14,990.00
Product Highlights
Built-In Odin Transmitter/Receiver
Compatible with Nikon i-TTL
Guide Number: 190′ at ISO 100 and 105mm
Zoom Range: 24-105mm (14mm with Panel)
Tilts from -7° to +90°
Rotates Left & Right 180°
Wireless Master/Slave TTL Functionality
Recycle Time: 0.1-5 Seconds
High-Speed, 1st & 2nd Curtain Sync
Runs on 4 AA Batteries
The Phottix Mitros+ TTL Transceiver Flash features a built-in Odin transmitter and receiver as well as full E-TTL / E-TTL II functionality for use with Canon cameras. The Mitros+ has a guide number of 190′ at ISO 100 in the 105mm position, useful for illuminating subjects within a zoom range of 24 to 105mm. Additionally, the flash features wireless transmission via an optical pulse or IR triggering and can access 4 channels and 3 groups.
This radio transmission and reception is compatible with Strato II transmitters in addition to full compatibility with the Odin-series wireless devices. Also, this Mitros+ has memory functions for saving up to three sets of flash and function information for quickly changing when needed.
The flash head has the ability to rotate 180° in each direction and tilt from -7° to +90°. This allows for excellent control over bounce angles during a shoot. Also, the Mitros+ features a recycle time from 0.1 to 5 seconds that can be improved to 2.5 seconds with a quick flash mode.
Additionally, this flash unit features full manual controls and customizable shooting options that include high-speed sync and stroboscopic shooting modes. The flash runs on 4 AA batteries and comes with an attachable diffuser for softening light when needed. Other accessories include a soft case, 3.5mm sync cable, USB cable, USB drive with manual, an adapter for external power packs, and a flash stand.
- Radio transmission is compatible with Odin and Strato II wireless triggering systems up to 328′ away
- Wireless functionality via optical pulses in 4 channels and 3 groups with a range of up to 52.5′ indoors
- Ratio modes from 1:8 to 1:1 and 8:1 are available for firing multiple flash units
- A modeling flash setting is available for previewing how your shot will turn out
- High-speed synchronization allows you to fire using the fastest shutter speed available on your camera
- A bounce card and wide-angle diffuser are built into the flash head for convenience
- Stroboscopic mode fires a series of flashes at a frequency of 1-199 Hz for up to 100 flashes
- Status LED lights will notify you when the flash is ready to fire
- Overheating protection will slow the firing time to avoid damage from heat
- AF-assist light for focusing in poor lighting conditions
- Memory system for retaining your settings when the flash is powered off
- 3.5mm sync port for connecting this flash to a larger system
- USB port for installing firmware updates
| Mount | Shoe |
| Guide No. | 190.29′ (58 m) ISO100 at 105 mm position |
| Vari-Power | Manual: 1/1 – 1/128 |
| Bounce Head | -7° to +90° |
| Swivel Head | 360° |
| Coverage | 14 mm – 105 mm (Full frame) |
| Zoom Head | Full frame: 24 mm – 105 mm |
| Off Camera Terminal | 3.5mm, Proprietary |
| Recycle Time | Approximately 0.1 – 5 seconds |
| Flash-ready Indicator | Yes |
| Compensation | -3 EV to +3 EV (in 1/3 EV steps) |
| Wireless Operation | Method: Optical pulse Distance: Up to 52.5′ / 16.00 m Method: RF Distance: Up to 328.08′ / 100 m |
| Wireless Communication Channels | 4 Channels |
| Wireless Groups | 3 Groups |
| Power Source | 4x AA Alkaline, Rechargeable NiMH Batteries |
| Dimensions (WxHxD) | 8.0 x 3.1 x 2.3″ / 20.3 x 7.8 x 5.8 cm |
| Weight | 15.06 oz / 427 g |